.100” 2.54mm Female Header, Dual Row, Right Angle THT Type PCB Connector, H=8.5mm
Female header always called as “Header connector”, ELETE provides
wide-range of header connector, from 2.54mm (.100″ inch) pitch to
1.0mm (.039″ inch) pitch. The number of pins (contacts) is from 2
to 40 pins per row. There are three type: Straight (Dip Vertical),
Right angle, SMT (surface mount).
If you can not find the items you interest from above items,
welcome to contact us, and you will always get fully responsive
|Insulation Resistance||1000MΩ Min.|
|Dielectric Withstanding||600V AC|
|Contact Resistance||20mΩ Max.|
|Insulation Material||Polyester, UL 94V-0 Nylon 6T(Processing tem.260°C,10seconds)|
2.54mm Male Pin Header connectors
For standard (.100″ inch) 2.54mm Pitch Pin header, there have three version: Straight(Vertical), Right-angle(Side
entry) and SMT(Surface-mount). Straight and Right-angle are Through
holes configurations, and the other is SMT which also called SMD.
Pins (Number of contacts, which also called circuits) Range:
- Single row: from Minimum 2 pins to 40 pins (Max.)
- Dual row: from Minimum 4 pins (2x2P) to 80 pins (2*40P)
- If you need to custom male header up to three or four row, welcome
to contact us.
The application of 2.54mm male headers is wide in general if you have not decided to choose how many pins
header for your PCB board, you can order 40 pins which is called by
breakaway pin header, then you can easy to cut the header in any
pins you want once you have an idea.
This 2.54mm connector can be highly customized.
- Pin Length can be specifiable according to your requirement.
- Spacer heights also can be specifiable to meet your PCB board’s
- Insulator Height: the insulator can be stackable.
ELETE offer different options for the materials of the headers. All
are High-Temperature Thermoplastic. For Straight and Right-angle
version, PBT material is in common, and Plated 0.8μ Gold flash over
50μ± nickel. For Surface-Mount connectors, use PA6T, so it can pass
IR Reflow or 250°C Wave Solder easily. The operating temperature of
-40°C to + 105°C and have a current rating of 3 amps. You can click
the specific product to check the datasheet in the page.
Package term: The through holes Male headers were packed by Bag or
Tape. and SMT types was packed by Tape&Reel. All product with